Free We the People SVG

We the People in Amatic SC SVG

We the People in Amatic SC, as a solid black shape
We the People in Amatic SC. The preview is the SVG file itself.

“We the People” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size89 × 100 mm (3.49 × 3.94 in), scales to any size
Pieces11 separate pieces
Outlines to cut14: 11 outer edges and 3 cut-outs
Cut length1,400 mm at this size
Narrowest part1.5 mm at this size
Nodes447 curve and line segments

Measured from the file. PNG: 1,781 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.89 × 1 in (23 × 25 mm)0.38 mm356 mm110Too fine for most machines
1.77 × 2 in (45 × 51 mm)0.76 mm711 mm30Fine detail: vinyl and paper only, weed with care
2.66 × 3 in (68 × 76 mm)1.1 mm1,067 mm12Vinyl, card and thin sheet
3.54 × 4 in (90 × 102 mm)1.5 mm1,422 mm6Vinyl, card and thin sheet
5.32 × 6 in (135 × 152 mm)2.3 mm2,134 mm2Vinyl, card and thin sheet
7.09 × 8 in (180 × 203 mm)3 mm2,845 mm1Any material, including 3 mm wood and acrylic
10.63 × 12 in (270 × 305 mm)4.6 mm4,267 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More We the People SVG files

← We the People in Alfa Slab One All 12 We the People designs We the People in block capitals →