Free watering can SVG

Layered watering can with flowers SVG

Layered watering can with flowers, in layered colours
Layered watering can with flowers. The preview is the SVG file itself.

Four layers to stack, with the can facing left: a teal can, darker bands for the rim and the body, green stems and leaves, and three yellow flower heads. Cut each from its own colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 95 mm (3.94 × 3.74 in), scales to any size
Pieces10 separate pieces
Outlines to cut14: 10 outer edges and 4 cut-outs
Cut length1,068 mm at this size
Narrowest part5.9 mm at this size
Nodes159 curve and line segments
Layers4: can, bands, stems and leaves and flowers

Measured from the file. PNG: 2,000 × 1,906 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.95 in (25 × 24 mm)1.5 mm271 mm100Vinyl, card and thin sheet
2 × 1.9 in (51 × 48 mm)3 mm543 mm25Vinyl, card and thin sheet
3 × 2.85 in (76 × 72 mm)4.5 mm814 mm9Any material, including 3 mm wood and acrylic
4 × 3.8 in (102 × 97 mm)6 mm1,085 mm6Any material, including 3 mm wood and acrylic
6 × 5.71 in (152 × 145 mm)9 mm1,628 mm2Any material, including 3 mm wood and acrylic
8 × 7.61 in (203 × 193 mm)12 mm2,170 mm1Any material, including 3 mm wood and acrylic
12 × 11.41 in (305 × 290 mm)18 mm3,255 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More watering can SVG files

← Gardening set with a watering can All 13 watering cans Garden watering can →