Free water tracker SVG

Water tracker bottle in one piece SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Water tracker bottle in one piece, as a solid black shape
Water tracker bottle in one piece. The preview is the SVG file itself.

A sports bottle with a cap and a spout, in one piece, with the seven times from 7AM to 7PM and their marks cut through its side. A picture of the idea for a planner, a card or a wall chart.

What is in the file

Size49 × 100 mm (1.91 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut32: 1 outer edge and 31 cut-outs
Cut length1,174 mm at this size
Narrowest part1.3 mm at this size
Nodes405 curve and line segments

Measured from the file. PNG: 1,010 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.49 × 1 in (12 × 25 mm)0.33 mm298 mm170Too fine for most machines
0.97 × 2 in (25 × 51 mm)0.66 mm596 mm50Fine detail: vinyl and paper only, weed with care
1.45 × 3 in (37 × 76 mm)0.99 mm895 mm21Fine detail: vinyl and paper only, weed with care
1.94 × 4 in (49 × 102 mm)1.3 mm1,193 mm10Vinyl, card and thin sheet
2.91 × 6 in (74 × 152 mm)2 mm1,789 mm3Vinyl, card and thin sheet
3.88 × 8 in (99 × 203 mm)2.6 mm2,386 mm2Vinyl, card and thin sheet
5.82 × 12 in (148 × 305 mm)4 mm3,578 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More water tracker SVG files

← Water tracker with eight drops to tick All 11 water trackers Water tracker strip in one piece →