Water tower outline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The tower as a line drawing: roof, drum and round bottom as outlines, the walkway, and the legs, riser and tie rods drawn a little lighter, on a ground line. For colouring pages and pen plotters.
What is in the file
| Size | 73 × 100 mm (2.88 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 23: 1 outer edge and 22 cut-outs |
| Cut length | 1,458 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 125 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,483 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.73 × 1 in (19 × 25 mm) | 0.53 mm | 370 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 1.46 × 2 in (37 × 51 mm) | 1.1 mm | 741 mm | 35 | Vinyl, card and thin sheet |
| 2.19 × 3 in (56 × 76 mm) | 1.6 mm | 1,111 mm | 15 | Vinyl, card and thin sheet |
| 2.92 × 4 in (74 × 102 mm) | 2.1 mm | 1,481 mm | 6 | Vinyl, card and thin sheet |
| 4.39 × 6 in (111 × 152 mm) | 3.2 mm | 2,222 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.85 × 8 in (149 × 203 mm) | 4.3 mm | 2,963 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.77 × 12 in (223 × 305 mm) | 6.4 mm | 4,444 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More water tower SVG files
-
Layered water tower in six colours Layered · 7 pieces -
Water tower on steel legs Solid · one piece -
Water tower silhouette over the treetops Solid · one piece -
Water tower with a blank tank for a name Solid · one piece -
Water tower with a heart Solid · one piece -
Water tower ball on a pedestal Solid · one piece -
Rooftop water tower of wood Solid · one piece -
Railroad water tower with a spout Solid · one piece
← Water tower at sunset in a ring All 13 water towers Layered water tower in six colours →