Water tower on steel legs SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The small-town tower: a riveted drum with a cone roof and a ball on top, a round bottom, a railed walkway, two raking legs, a riser pipe up the middle and tie rods crossed in three bays.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 74 × 100 mm (2.91 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 30: 1 outer edge and 29 cut-outs |
| Cut length | 1,321 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 129 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,500 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.74 × 1 in (19 × 25 mm) | 0.51 mm | 336 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 1.48 × 2 in (38 × 51 mm) | 1 mm | 671 mm | 35 | Vinyl, card and thin sheet |
| 2.22 × 3 in (56 × 76 mm) | 1.5 mm | 1,007 mm | 15 | Vinyl, card and thin sheet |
| 2.96 × 4 in (75 × 102 mm) | 2 mm | 1,342 mm | 6 | Vinyl, card and thin sheet |
| 4.44 × 6 in (113 × 152 mm) | 3 mm | 2,013 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.92 × 8 in (150 × 203 mm) | 4.1 mm | 2,684 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8.88 × 12 in (226 × 305 mm) | 6.1 mm | 4,026 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More water tower SVG files
-
Water tower silhouette over the treetops Solid · one piece -
Water tower with a blank tank for a name Solid · one piece -
Water tower with a heart Solid · one piece -
Water tower ball on a pedestal Solid · one piece -
Rooftop water tower of wood Solid · one piece -
Railroad water tower with a spout Solid · one piece -
Small town with a water tower Solid · one piece -
Farm silos for a water tower skyline Solid · one piece
← Layered water tower in six colours All 13 water towers Water tower silhouette over the treetops →