Free Uncle SVG

Uncle in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Uncle in Pacifico, as a solid black shape
Uncle in Pacifico. The preview is the SVG file itself.

“Uncle” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 36 mm (3.94 × 1.43 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length591 mm at this size
Narrowest part2.5 mm at this size
Nodes143 curve and line segments

Measured from the file. PNG: 2,000 × 775 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.36 in (25 × 9 mm)0.64 mm150 mm210Fine detail: vinyl and paper only, weed with care
2 × 0.73 in (51 × 18 mm)1.3 mm300 mm65Vinyl, card and thin sheet
3 × 1.09 in (76 × 28 mm)1.9 mm450 mm27Vinyl, card and thin sheet
4 × 1.45 in (102 × 37 mm)2.5 mm600 mm14Vinyl, card and thin sheet
6 × 2.18 in (152 × 55 mm)3.8 mm901 mm5Any material, including 3 mm wood and acrylic
8 × 2.9 in (203 × 74 mm)5.1 mm1,201 mm3Any material, including 3 mm wood and acrylic
12 × 4.36 in (305 × 111 mm)7.6 mm1,801 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Uncle SVG files

← Uncle with a handlebar moustache All 13 Uncle designs Uncle in Lobster →