Uncle in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Uncle” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 27 mm (3.94 × 1.06 in), scales to any size |
|---|---|
| Pieces | 5 separate pieces |
| Outlines to cut | 6: 5 outer edges and 1 cut-out |
| Cut length | 522 mm at this size |
| Narrowest part | 3.6 mm at this size |
| Nodes | 92 curve and line segments |
Measured from the file. PNG: 2,000 × 592 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.27 in (25 × 7 mm) | 0.91 mm | 133 mm | 260 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.54 in (51 × 14 mm) | 1.8 mm | 265 mm | 80 | Vinyl, card and thin sheet |
| 3 × 0.8 in (76 × 20 mm) | 2.7 mm | 398 mm | 36 | Vinyl, card and thin sheet |
| 4 × 1.07 in (102 × 27 mm) | 3.7 mm | 530 mm | 18 | Any material, including 3 mm wood and acrylic |
| 6 × 1.61 in (152 × 41 mm) | 5.5 mm | 796 mm | 6 | Any material, including 3 mm wood and acrylic |
| 8 × 2.14 in (203 × 54 mm) | 7.3 mm | 1,061 mm | 5 | Any material, including 3 mm wood and acrylic |
| 12 × 3.22 in (305 × 82 mm) | 11 mm | 1,591 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Uncle SVG files
-
Uncle in Amatic SC Solid · 5 pieces
-
Uncle in block capitals Solid · 5 pieces
-
Uncle with a swash underline Solid · one piece
-
Uncle with stars Solid · 8 pieces
-
Uncle outline lettering Outline · 6 pieces
-
Uncle stencil plate Solid · one piece
-
Uncle with a drop shadow Layered · 2 pieces
-
Uncle with a handlebar moustache Solid · 3 pieces
← Uncle in Lilita One All 13 Uncle designs Uncle in Amatic SC →