Free Turkey and Tantrums SVG

Turkey and Tantrums in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Turkey and Tantrums in Lobster, as a solid black shape
Turkey and Tantrums in Lobster. The preview is the SVG file itself.

“Turkey and Tantrums” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 48 mm (3.94 × 1.88 in), scales to any size
Pieces7 separate pieces
Outlines to cut13: 7 outer edges and 6 cut-outs
Cut length1,038 mm at this size
Narrowest part0.9 mm at this size
Nodes355 curve and line segments

Measured from the file. PNG: 2,000 × 996 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.48 in (25 × 12 mm)0.23 mm264 mm180Too fine for most machines
2 × 0.96 in (51 × 24 mm)0.46 mm527 mm50Too fine for most machines
3 × 1.43 in (76 × 36 mm)0.69 mm791 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.91 in (102 × 49 mm)0.91 mm1,055 mm10Fine detail: vinyl and paper only, weed with care
6 × 2.87 in (152 × 73 mm)1.4 mm1,582 mm3Vinyl, card and thin sheet
8 × 3.82 in (203 × 97 mm)1.8 mm2,109 mm3Vinyl, card and thin sheet
12 × 5.74 in (305 × 146 mm)2.7 mm3,164 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Turkey and Tantrums SVG files

← Turkey and Tantrums in Pacifico All 13 Turkey and Tantrums designs Turkey and Tantrums in Kaushan Script →