Free Turkey and Tantrums SVG

Turkey and Tantrums in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Turkey and Tantrums in Alfa Slab One, as a solid black shape
Turkey and Tantrums in Alfa Slab One. The preview is the SVG file itself.

“Turkey and Tantrums” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 33 mm (3.94 × 1.28 in), scales to any size
Pieces17 separate pieces
Outlines to cut21: 17 outer edges and 4 cut-outs
Cut length905 mm at this size
Narrowest part1.4 mm at this size
Nodes363 curve and line segments

Measured from the file. PNG: 2,000 × 704 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.33 in (25 × 8 mm)0.36 mm230 mm230Too fine for most machines
2 × 0.65 in (51 × 17 mm)0.71 mm460 mm70Fine detail: vinyl and paper only, weed with care
3 × 0.98 in (76 × 25 mm)1.1 mm690 mm30Vinyl, card and thin sheet
4 × 1.3 in (102 × 33 mm)1.4 mm919 mm16Vinyl, card and thin sheet
6 × 1.96 in (152 × 50 mm)2.1 mm1,379 mm5Vinyl, card and thin sheet
8 × 2.61 in (203 × 66 mm)2.8 mm1,839 mm4Vinyl, card and thin sheet
12 × 3.91 in (305 × 99 mm)4.3 mm2,758 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Turkey and Tantrums SVG files

← Turkey and Tantrums in Lilita One All 13 Turkey and Tantrums designs Turkey and Tantrums in Amatic SC →