Free tulip SVG

Layered tulip in three colours SVG

Layered tulip in three colours, in layered colours
Layered tulip in three colours. The preview is the SVG file itself.

Three layers to stack: a straight stem and two leaves in green, the back petals in a deep pink and the two front petals in a lighter one. Change the pinks for any tulip colour you like.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size58 × 100 mm (2.26 × 3.94 in), scales to any size
Pieces3 separate pieces
Outlines to cut3 outlines
Cut length545 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes80 curve and line segments
Layers3: stem and leaves, back petals and front petals

Measured from the file. PNG: 1,183 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.58 × 1 in (15 × 25 mm)Over 1.5 mm138 mm150Vinyl, card and thin sheet
1.15 × 2 in (29 × 51 mm)Over 3 mm277 mm45Any material, including 3 mm wood and acrylic
1.73 × 3 in (44 × 76 mm)Over 4.6 mm415 mm18Any material, including 3 mm wood and acrylic
2.3 × 4 in (58 × 102 mm)Over 6.1 mm554 mm8Any material, including 3 mm wood and acrylic
3.45 × 6 in (88 × 152 mm)Over 9.1 mm831 mm3Any material, including 3 mm wood and acrylic
4.6 × 8 in (117 × 203 mm)Over 12 mm1,107 mm2Any material, including 3 mm wood and acrylic
6.9 × 12 in (175 × 305 mm)Over 18 mm1,661 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tulip SVG files

← Tulip outline All 14 tulips Tulip on a curved stem →