Free train SVG

Train caboose SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Train caboose, as a solid black shape
Train caboose. The preview is the SVG file itself.

The van at the tail of an old freight train: a lookout cupola on the roof, four side windows, a stove pipe, a railed platform and steps at each end and two bogies.

What is in the file

Size100 × 57 mm (3.94 × 2.24 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length866 mm at this size
Narrowest part2.3 mm at this size
Nodes170 curve and line segments

Measured from the file. PNG: 2,000 × 1,173 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.57 in (25 × 14 mm)0.58 mm220 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.14 in (51 × 29 mm)1.2 mm440 mm45Vinyl, card and thin sheet
3 × 1.71 in (76 × 43 mm)1.8 mm660 mm18Vinyl, card and thin sheet
4 × 2.28 in (102 × 58 mm)2.3 mm880 mm8Vinyl, card and thin sheet
6 × 3.42 in (152 × 87 mm)3.5 mm1,320 mm3Any material, including 3 mm wood and acrylic
8 × 4.56 in (203 × 116 mm)4.7 mm1,760 mm2Any material, including 3 mm wood and acrylic
12 × 6.84 in (305 × 174 mm)7 mm2,640 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More train SVG files

← Train car with a sliding door All 15 trains Train with three blank wagons →