Free tractor SVG

Pulling tractor with its front wheels up SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pulling tractor with its front wheels up, as a solid black shape
Pulling tractor with its front wheels up. The preview is the SVG file itself.

A tractor at a pull: nose in the air, front wheel off the ground, smoke pouring back from the exhaust and a wheelie bar trailing behind.

What is in the file

Size100 × 77 mm (3.94 × 3.04 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut34: 1 outer edge and 33 cut-outs
Cut length1,049 mm at this size
Narrowest part1 mm at this size
Nodes371 curve and line segments

Measured from the file. PNG: 2,000 × 1,562 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.77 in (25 × 20 mm)0.25 mm266 mm120Too fine for most machines
2 × 1.54 in (51 × 39 mm)0.51 mm533 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.32 in (76 × 59 mm)0.76 mm799 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.09 in (102 × 78 mm)1 mm1,066 mm6Vinyl, card and thin sheet
6 × 4.63 in (152 × 118 mm)1.5 mm1,599 mm2Vinyl, card and thin sheet
8 × 6.18 in (203 × 157 mm)2 mm2,132 mm1Vinyl, card and thin sheet
12 × 9.26 in (305 × 235 mm)3 mm3,197 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tractor SVG files

← Tractor tyre with deep lugs All 13 tractors Tractor card front with a rising sun →