Free tornado SVG

Tornado with flying debris SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Tornado with flying debris, as a solid black shape — Tornado with flying debris. The preview is the SVG file itself.

The banded funnel with planks, leaves and roof tiles whirling round its lower half. The debris is eleven loose pieces, so on vinyl use transfer tape to keep each one in place.

What is in the file

Size	88 × 100 mm (3.46 × 3.94 in), scales to any size
Pieces	12 separate pieces
Outlines to cut	12 outlines
Cut length	932 mm at this size
Narrowest part	2.8 mm at this size
Nodes	230 curve and line segments

Measured from the file. PNG: 1,769 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.88 × 1 in (22 × 25 mm)	0.71 mm	237 mm	110	Fine detail: vinyl and paper only, weed with care
1.76 × 2 in (45 × 51 mm)	1.4 mm	473 mm	30	Vinyl, card and thin sheet
2.64 × 3 in (67 × 76 mm)	2.1 mm	710 mm	12	Vinyl, card and thin sheet
3.52 × 4 in (89 × 102 mm)	2.8 mm	947 mm	6	Vinyl, card and thin sheet
5.28 × 6 in (134 × 152 mm)	4.3 mm	1,420 mm	2	Any material, including 3 mm wood and acrylic
7.04 × 8 in (179 × 203 mm)	5.7 mm	1,894 mm	1	Any material, including 3 mm wood and acrylic
10.56 × 12 in (268 × 305 mm)	8.5 mm	2,841 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tornado SVG files

← Tornado in a circle All 13 tornadoes Tornado outline →