Free toilet paper SVG

Toilet paper roll on a holder SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Toilet paper roll on a holder, as a solid black shape
Toilet paper roll on a holder. The preview is the SVG file itself.

A roll hanging on a wall bracket: a plate with two screw holes, a bar across the top and an arm down to each end of the spindle, with the sheet hanging below. A label for the bathroom cupboard.

What is in the file

Size67 × 100 mm (2.63 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length876 mm at this size
Narrowest part1 mm at this size
Nodes201 curve and line segments

Measured from the file. PNG: 1,360 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.67 × 1 in (17 × 25 mm)0.25 mm223 mm140Too fine for most machines
1.33 × 2 in (34 × 51 mm)0.51 mm445 mm35Fine detail: vinyl and paper only, weed with care
2 × 3 in (51 × 76 mm)0.76 mm668 mm15Fine detail: vinyl and paper only, weed with care
2.67 × 4 in (68 × 102 mm)1 mm890 mm8Vinyl, card and thin sheet
4 × 6 in (102 × 152 mm)1.5 mm1,335 mm2Vinyl, card and thin sheet
5.34 × 8 in (136 × 203 mm)2 mm1,780 mm2Vinyl, card and thin sheet
8 × 12 in (203 × 305 mm)3 mm2,670 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More toilet paper SVG files

← Empty toilet paper roll All 15 toilet paper rolls Stack of three toilet paper rolls →