Tassel Worth the Hassle in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“The Tassel Was Worth the Hassle” set in Alfa Slab One, a very heavy slab serif, on 3 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 53 mm (3.94 × 2.09 in), scales to any size |
|---|---|
| Pieces | 25 separate pieces |
| Outlines to cut | 33: 25 outer edges and 8 cut-outs |
| Cut length | 1,404 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 481 curve and line segments |
Measured from the file. PNG: 2,000 × 1,098 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.53 in (25 × 13 mm) | 0.43 mm | 357 mm | 160 | Too fine for most machines |
| 2 × 1.06 in (51 × 27 mm) | 0.86 mm | 713 mm | 45 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.59 in (76 × 40 mm) | 1.3 mm | 1,070 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.12 in (102 × 54 mm) | 1.7 mm | 1,426 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.19 in (152 × 81 mm) | 2.6 mm | 2,140 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.25 in (203 × 108 mm) | 3.5 mm | 2,853 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.37 in (305 × 162 mm) | 5.2 mm | 4,279 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More The Tassel Was Worth the Hassle SVG files
-
Tassel Worth the Hassle in Amatic SC Solid · 26 pieces
-
Tassel Worth the Hassle in block capitals Solid · 26 pieces
-
Tassel Worth the Hassle in script and capitals Solid · 20 pieces
-
Tassel Worth the Hassle with stars Solid · 17 pieces
-
Tassel Worth the Hassle outline lettering Outline · 26 pieces
-
Tassel Worth the Hassle stencil plate Solid · one piece
-
Tassel Worth the Hassle with a drop shadow Layered · 14 pieces
-
Tassel Worth the Hassle with a graduation cap Solid · 21 pieces
← Tassel Worth the Hassle in Lilita One All 13 The Tassel Was Worth the Hassle designs Tassel Worth the Hassle in Amatic SC →