Tassel Worth the Hassle with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“The Tassel Was Worth the Hassle” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 80 mm (3.94 × 3.16 in), scales to any size |
|---|---|
| Pieces | 14 separate pieces |
| Outlines to cut | 36: 14 outer edges and 22 cut-outs |
| Cut length | 2,577 mm at this size |
| Narrowest part | 4.8 mm at this size |
| Nodes | 931 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,621 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.8 in (25 × 20 mm) | 1.2 mm | 655 mm | 120 | Vinyl, card and thin sheet |
| 2 × 1.61 in (51 × 41 mm) | 2.4 mm | 1,309 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.41 in (76 × 61 mm) | 3.7 mm | 1,964 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.21 in (102 × 82 mm) | 4.9 mm | 2,618 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.82 in (152 × 122 mm) | 7.3 mm | 3,927 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.42 in (203 × 163 mm) | 9.8 mm | 5,236 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.64 in (305 × 245 mm) | 15 mm | 7,855 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More The Tassel Was Worth the Hassle SVG files
-
Tassel Worth the Hassle with a graduation cap Solid · 21 pieces
-
Tassel Worth the Hassle in Pacifico Solid · 7 pieces
-
Tassel Worth the Hassle in Lobster Solid · 11 pieces
-
Tassel Worth the Hassle in Kaushan Script Solid · 26 pieces
-
Tassel Worth the Hassle in Lilita One Solid · 26 pieces
-
Tassel Worth the Hassle in Alfa Slab One Solid · 25 pieces
-
Tassel Worth the Hassle in Amatic SC Solid · 26 pieces
-
Tassel Worth the Hassle in block capitals Solid · 26 pieces
← Tassel Worth the Hassle stencil plate All 13 The Tassel Was Worth the Hassle designs Tassel Worth the Hassle with a graduation cap →