Free Support Wildlife Raise Boys SVG

Support Wildlife Raise Boys with a drop shadow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Support Wildlife Raise Boys with a drop shadow, in layered colours
Support Wildlife Raise Boys with a drop shadow. The preview is the SVG file itself.

“Support Wildlife Raise Boys” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

What is in the file

Size100 × 43 mm (3.94 × 1.7 in), scales to any size
Pieces12 separate pieces
Outlines to cut40: 12 outer edges and 28 cut-outs
Cut length1,575 mm at this size
Narrowest part0.9 mm at this size
Nodes713 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 906 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.43 in (25 × 11 mm)0.23 mm400 mm190Too fine for most machines
2 × 0.86 in (51 × 22 mm)0.46 mm800 mm55Too fine for most machines
3 × 1.29 in (76 × 33 mm)0.69 mm1,200 mm24Fine detail: vinyl and paper only, weed with care
4 × 1.72 in (102 × 44 mm)0.91 mm1,600 mm12Fine detail: vinyl and paper only, weed with care
6 × 2.59 in (152 × 66 mm)1.4 mm2,400 mm4Vinyl, card and thin sheet
8 × 3.45 in (203 × 88 mm)1.8 mm3,200 mm3Vinyl, card and thin sheet
12 × 5.17 in (305 × 131 mm)2.7 mm4,801 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Support Wildlife Raise Boys SVG files

← Support Wildlife Raise Boys stencil plate All 11 Support Wildlife Raise Boys designs Support Wildlife Raise Boys with a star →