Support Wildlife Raise Boys in Pacifico SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Support Wildlife Raise Boys” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.
What is in the file
| Size | 100 × 41 mm (3.94 × 1.63 in), scales to any size |
|---|---|
| Pieces | 8 separate pieces |
| Outlines to cut | 27: 8 outer edges and 19 cut-outs |
| Cut length | 1,066 mm at this size |
| Narrowest part | 0.9 mm at this size |
| Nodes | 528 curve and line segments |
Measured from the file. PNG: 2,000 × 873 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.41 in (25 × 11 mm) | 0.23 mm | 271 mm | 190 | Too fine for most machines |
| 2 × 0.83 in (51 × 21 mm) | 0.46 mm | 542 mm | 55 | Too fine for most machines |
| 3 × 1.24 in (76 × 32 mm) | 0.69 mm | 812 mm | 24 | Fine detail: vinyl and paper only, weed with care |
| 4 × 1.66 in (102 × 42 mm) | 0.91 mm | 1,083 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 6 × 2.48 in (152 × 63 mm) | 1.4 mm | 1,625 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.31 in (203 × 84 mm) | 1.8 mm | 2,166 mm | 3 | Vinyl, card and thin sheet |
| 12 × 4.97 in (305 × 126 mm) | 2.7 mm | 3,249 mm | 2 | Vinyl, card and thin sheet |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Support Wildlife Raise Boys SVG files
-
Support Wildlife Raise Boys in Lobster Solid · 5 pieces
-
Support Wildlife Raise Boys in Lilita One Solid · 27 pieces
-
Support Wildlife Raise Boys in Amatic SC Solid · 24 pieces
-
Support Wildlife Raise Boys in block capitals Solid · 24 pieces
-
Support Wildlife Raise Boys in script and capitals Solid · 14 pieces
-
Support Wildlife Raise Boys with stars Solid · 11 pieces
-
Support Wildlife Raise Boys outline lettering Outline · 29 pieces
-
Support Wildlife Raise Boys stencil plate Solid · one piece
← Support Wildlife Raise Boys with a star All 11 Support Wildlife Raise Boys designs Support Wildlife Raise Boys in Lobster →