Free Stay Wild SVG

Stay Wild stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Stay Wild stencil plate, as a solid black shape
Stay Wild stencil plate. The preview is the SVG file itself.

A rounded plate with “STAY WILD” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 93 mm (3.94 × 3.67 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length1,453 mm at this size
Narrowest part1.7 mm at this size
Nodes189 curve and line segments

Measured from the file. PNG: 2,000 × 1,869 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.93 in (25 × 24 mm)0.43 mm369 mm100Too fine for most machines
2 × 1.86 in (51 × 47 mm)0.86 mm738 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.8 in (76 × 71 mm)1.3 mm1,107 mm12Vinyl, card and thin sheet
4 × 3.73 in (102 × 95 mm)1.7 mm1,476 mm6Vinyl, card and thin sheet
6 × 5.59 in (152 × 142 mm)2.6 mm2,214 mm2Vinyl, card and thin sheet
8 × 7.46 in (203 × 189 mm)3.5 mm2,952 mm1Any material, including 3 mm wood and acrylic
12 × 11.18 in (305 × 284 mm)5.2 mm4,429 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Stay Wild SVG files

← Stay Wild outline lettering All 13 Stay Wild designs Stay Wild with a drop shadow →