Free Stay Wild SVG

Stay Wild in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Stay Wild in Alfa Slab One, as a solid black shape
Stay Wild in Alfa Slab One. The preview is the SVG file itself.

“Stay Wild” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 79 mm (3.94 × 3.13 in), scales to any size
Pieces9 separate pieces
Outlines to cut11: 9 outer edges and 2 cut-outs
Cut length1,064 mm at this size
Narrowest part3.8 mm at this size
Nodes169 curve and line segments

Measured from the file. PNG: 2,000 × 1,604 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.79 in (25 × 20 mm)0.97 mm270 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.59 in (51 × 40 mm)1.9 mm541 mm30Vinyl, card and thin sheet
3 × 2.38 in (76 × 61 mm)2.9 mm811 mm12Vinyl, card and thin sheet
4 × 3.18 in (102 × 81 mm)3.9 mm1,081 mm6Any material, including 3 mm wood and acrylic
6 × 4.76 in (152 × 121 mm)5.8 mm1,622 mm2Any material, including 3 mm wood and acrylic
8 × 6.35 in (203 × 161 mm)7.7 mm2,162 mm1Any material, including 3 mm wood and acrylic
12 × 9.53 in (305 × 242 mm)12 mm3,243 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Stay Wild SVG files

← Stay Wild in Lilita One All 13 Stay Wild designs Stay Wild in Amatic SC →