Free square SVG

Square doily frame SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Square doily frame, drawn as a line
Square doily frame. The preview is the SVG file itself.

A lace-edged frame: 40 scallops each pierced with an eyelet, a second row of round holes inside them, and a 61 mm opening in the middle for a name, a number or a photo.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut74: 1 outer edge and 73 cut-outs
Cut length1,616 mm at this size
Narrowest part3.6 mm at this size
Nodes348 curve and line segments
Symmetry4-fold rotation and mirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.91 mm410 mm100Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)1.8 mm821 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)2.7 mm1,231 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)3.7 mm1,642 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)5.5 mm2,463 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)7.3 mm3,284 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)11 mm4,926 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More square SVG files

← Scalloped square All 17 squares Square plaque with scooped corners →