Free South Korea SVG

Split South Korea for a name SVG

Split South Korea for a name, as a solid black shape
Split South Korea for a name. The preview is the SVG file itself.

South Korea divided by a clear band 18 mm tall across its broadest part, for a family name, a town or a date set between the two halves. The halves of South Korea are loose pieces: line them up with transfer tape.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size52 × 100 mm (2.04 × 3.94 in), scales to any size
Pieces3 separate pieces
Outlines to cut3 outlines
Cut length320 mm at this size
Narrowest part3.3 mm at this size
Nodes272 curve and line segments

Measured from the file. PNG: 1,071 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.52 × 1 in (13 × 25 mm)0.84 mm81 mm170Fine detail: vinyl and paper only, weed with care
1.03 × 2 in (26 × 51 mm)1.7 mm163 mm45Vinyl, card and thin sheet
1.55 × 3 in (39 × 76 mm)2.5 mm244 mm18Vinyl, card and thin sheet
2.07 × 4 in (53 × 102 mm)3.4 mm325 mm10Any material, including 3 mm wood and acrylic
3.1 × 6 in (79 × 152 mm)5 mm488 mm3Any material, including 3 mm wood and acrylic
4.14 × 8 in (105 × 203 mm)6.7 mm650 mm2Any material, including 3 mm wood and acrylic
6.2 × 12 in (158 × 305 mm)10 mm975 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More South Korea SVG files

← South Korea with its name beneath All 10 South Korea designs South Korea in stripes →