Free South Korea SVG

South Korea with its name beneath SVG

South Korea with its name beneath, as a solid black shape — South Korea with its name beneath. The preview is the SVG file itself.

The solid shape of South Korea with “SOUTH KOREA” in narrow capitals under it. The letters of “South Korea” are loose pieces, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	62 × 100 mm (2.43 × 3.94 in), scales to any size
Pieces	12 separate pieces
Outlines to cut	16: 12 outer edges and 4 cut-outs
Cut length	650 mm at this size
Narrowest part	1.9 mm at this size
Nodes	494 curve and line segments

Measured from the file. PNG: 1,265 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.62 × 1 in (16 × 25 mm)	0.48 mm	165 mm	140	Too fine for most machines
1.24 × 2 in (31 × 51 mm)	0.97 mm	330 mm	40	Fine detail: vinyl and paper only, weed with care
1.85 × 3 in (47 × 76 mm)	1.4 mm	495 mm	15	Vinyl, card and thin sheet
2.47 × 4 in (63 × 102 mm)	1.9 mm	660 mm	8	Vinyl, card and thin sheet
3.71 × 6 in (94 × 152 mm)	2.9 mm	991 mm	3	Vinyl, card and thin sheet
4.94 × 8 in (126 × 203 mm)	3.9 mm	1,321 mm	2	Any material, including 3 mm wood and acrylic
7.42 × 12 in (188 × 305 mm)	5.8 mm	1,981 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More South Korea SVG files

← South Korea cut from a heart All 10 South Korea designs Split South Korea for a name →