Free South America SVG

South America in stripes SVG

South America in stripes, as a solid black shape
South America in stripes. The preview is the SVG file itself.

South America drawn as bands 5 mm tall with 3 mm between them. Cut the bands in one colour and lay them over the solid shape of South America in another; the bands are loose pieces.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size71 × 100 mm (2.79 × 3.94 in), scales to any size
Pieces13 separate pieces
Outlines to cut13 outlines
Cut length985 mm at this size
Narrowest part2.5 mm at this size
Nodes278 curve and line segments

Measured from the file. PNG: 1,440 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.71 × 1 in (18 × 25 mm)0.64 mm250 mm130Fine detail: vinyl and paper only, weed with care
1.42 × 2 in (36 × 51 mm)1.3 mm500 mm35Vinyl, card and thin sheet
2.13 × 3 in (54 × 76 mm)1.9 mm751 mm15Vinyl, card and thin sheet
2.84 × 4 in (72 × 102 mm)2.5 mm1,001 mm8Vinyl, card and thin sheet
4.25 × 6 in (108 × 152 mm)3.8 mm1,501 mm2Any material, including 3 mm wood and acrylic
5.67 × 8 in (144 × 203 mm)5.1 mm2,002 mm2Any material, including 3 mm wood and acrylic
8.51 × 12 in (216 × 305 mm)7.6 mm3,002 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More South America SVG files

← Split South America for a name All 10 South America designs Layered South America on an octagon →