Free South America SVG

South America with its name beneath SVG

South America with its name beneath, as a solid black shape — South America with its name beneath. The preview is the SVG file itself.

The solid shape of South America with “SOUTH AMERICA” in narrow capitals under it. The letters of “South America” are loose pieces, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	73 × 100 mm (2.87 × 3.94 in), scales to any size
Pieces	13 separate pieces
Outlines to cut	17: 13 outer edges and 4 cut-outs
Cut length	737 mm at this size
Narrowest part	1.4 mm at this size
Nodes	541 curve and line segments

Measured from the file. PNG: 1,477 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.73 × 1 in (18 × 25 mm)	0.36 mm	187 mm	130	Too fine for most machines
1.46 × 2 in (37 × 51 mm)	0.71 mm	374 mm	35	Fine detail: vinyl and paper only, weed with care
2.18 × 3 in (55 × 76 mm)	1.1 mm	562 mm	15	Vinyl, card and thin sheet
2.91 × 4 in (74 × 102 mm)	1.4 mm	749 mm	6	Vinyl, card and thin sheet
4.37 × 6 in (111 × 152 mm)	2.1 mm	1,123 mm	2	Vinyl, card and thin sheet
5.82 × 8 in (148 × 203 mm)	2.8 mm	1,498 mm	2	Vinyl, card and thin sheet
8.74 × 12 in (222 × 305 mm)	4.3 mm	2,246 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More South America SVG files

← South America cut from a heart All 10 South America designs Split South America for a name →