Free sock SVG

Pair of striped socks SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pair of striped socks, as a solid black shape
Pair of striped socks. The preview is the SVG file itself.

Two socks with three stripes on each leg, one tipped to the left and one to the right with their feet pointing apart. A slim line shows where the front sock overlaps, and the pair is one piece.

What is in the file

Size92 × 100 mm (3.6 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut24: 1 outer edge and 23 cut-outs
Cut length1,208 mm at this size
Narrowest part2.7 mm at this size
Nodes146 curve and line segments

Measured from the file. PNG: 1,837 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)0.69 mm307 mm100Fine detail: vinyl and paper only, weed with care
1.83 × 2 in (46 × 51 mm)1.4 mm614 mm30Vinyl, card and thin sheet
2.74 × 3 in (70 × 76 mm)2.1 mm920 mm12Vinyl, card and thin sheet
3.66 × 4 in (93 × 102 mm)2.7 mm1,227 mm6Vinyl, card and thin sheet
5.49 × 6 in (139 × 152 mm)4.1 mm1,841 mm2Any material, including 3 mm wood and acrylic
7.32 × 8 in (186 × 203 mm)5.5 mm2,455 mm1Any material, including 3 mm wood and acrylic
10.98 × 12 in (279 × 305 mm)8.2 mm3,682 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More sock SVG files

← Sock outline All 17 socks Long striped sock →