Free sleigh SVG

Sleigh outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Sleigh outline, drawn as a line
Sleigh outline. The preview is the SVG file itself.

The sleigh as an even line: the tub with its curled back and scrolled dash, one trim line along the side, and the runners and their two posts as solid strokes. For colouring and pen plotters.

What is in the file

Size100 × 56 mm (3.94 × 2.21 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length962 mm at this size
Narrowest part2 mm at this size
Nodes179 curve and line segments

Measured from the file. PNG: 2,000 × 1,158 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.56 in (25 × 14 mm)0.51 mm244 mm160Fine detail: vinyl and paper only, weed with care
2 × 1.12 in (51 × 29 mm)1 mm489 mm45Vinyl, card and thin sheet
3 × 1.69 in (76 × 43 mm)1.5 mm733 mm18Vinyl, card and thin sheet
4 × 2.25 in (102 × 57 mm)2 mm977 mm8Vinyl, card and thin sheet
6 × 3.37 in (152 × 86 mm)3 mm1,466 mm3Any material, including 3 mm wood and acrylic
8 × 4.5 in (203 × 114 mm)4.1 mm1,955 mm2Any material, including 3 mm wood and acrylic
12 × 6.74 in (305 × 171 mm)6.1 mm2,932 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More sleigh SVG files

← Sleigh bell with a bow All 12 sleighs Layered sleigh in four colours →