Free skyline SVG

Skyline outline SVG

Skyline outline, drawn as a line
Skyline outline. The preview is the SVG file itself.

Nine buildings drawn as hollow outlines standing on one ground line, each with a small doorway. For colouring, foil, engraving and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 79 mm (3.94 × 3.13 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut19: 1 outer edge and 18 cut-outs
Cut length1,502 mm at this size
Narrowest part1.9 mm at this size
Nodes185 curve and line segments

Measured from the file. PNG: 2,000 × 1,604 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.79 in (25 × 20 mm)0.48 mm382 mm120Too fine for most machines
2 × 1.59 in (51 × 40 mm)0.97 mm763 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.38 in (76 × 61 mm)1.4 mm1,145 mm12Vinyl, card and thin sheet
4 × 3.18 in (102 × 81 mm)1.9 mm1,526 mm6Vinyl, card and thin sheet
6 × 4.76 in (152 × 121 mm)2.9 mm2,289 mm2Vinyl, card and thin sheet
8 × 6.35 in (203 × 161 mm)3.9 mm3,052 mm1Any material, including 3 mm wood and acrylic
12 × 9.53 in (305 × 242 mm)5.8 mm4,578 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More skyline SVG files

← Bank building with six columns All 16 skylines Layered skyline at sunset →