Free She Said Yes SVG

She Said Yes stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

She Said Yes stencil plate, as a solid black shape
She Said Yes stencil plate. The preview is the SVG file itself.

A rounded plate with “SHE SAID YES” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 89 mm (3.94 × 3.5 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length1,374 mm at this size
Narrowest part1 mm at this size
Nodes244 curve and line segments

Measured from the file. PNG: 2,000 × 1,785 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.89 in (25 × 23 mm)0.25 mm349 mm110Too fine for most machines
2 × 1.78 in (51 × 45 mm)0.51 mm698 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.66 in (76 × 68 mm)0.76 mm1,047 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.55 in (102 × 90 mm)1 mm1,396 mm6Vinyl, card and thin sheet
6 × 5.33 in (152 × 135 mm)1.5 mm2,094 mm2Vinyl, card and thin sheet
8 × 7.1 in (203 × 180 mm)2 mm2,792 mm1Vinyl, card and thin sheet
12 × 10.66 in (305 × 271 mm)3 mm4,188 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More She Said Yes SVG files

← She Said Yes outline lettering All 12 She Said Yes designs She Said Yes with a drop shadow →