Free She Said Yes SVG

She Said Yes outline lettering SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

She Said Yes outline lettering, drawn as a line
She Said Yes outline lettering. The preview is the SVG file itself.

“She Said Yes” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

What is in the file

Size100 × 48 mm (3.94 × 1.9 in), scales to any size
Pieces12 separate pieces
Outlines to cut28: 12 outer edges and 16 cut-outs
Cut length1,153 mm at this size
Narrowest part1.4 mm at this size
Nodes386 curve and line segments

Measured from the file. PNG: 2,000 × 1,004 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.48 in (25 × 12 mm)0.36 mm293 mm170Too fine for most machines
2 × 0.96 in (51 × 24 mm)0.71 mm586 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.45 in (76 × 37 mm)1.1 mm879 mm21Vinyl, card and thin sheet
4 × 1.93 in (102 × 49 mm)1.4 mm1,171 mm10Vinyl, card and thin sheet
6 × 2.89 in (152 × 73 mm)2.1 mm1,757 mm3Vinyl, card and thin sheet
8 × 3.86 in (203 × 98 mm)2.8 mm2,343 mm3Vinyl, card and thin sheet
12 × 5.78 in (305 × 147 mm)4.3 mm3,514 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More She Said Yes SVG files

← She Said Yes with hearts All 12 She Said Yes designs She Said Yes stencil plate →