Free seahorse SVG

Cute baby seahorse SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cute baby seahorse, as a solid black shape
Cute baby seahorse. The preview is the SVG file itself.

A baby seahorse with a big head, a big eye, a short snout, a round belly and a tight curl of a tail. Thick all over, so it suits felt, craft foam, stickers and nursery walls.

What is in the file

Size57 × 100 mm (2.23 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length446 mm at this size
Narrowest part2.1 mm at this size
Nodes199 curve and line segments

Measured from the file. PNG: 1,167 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.57 × 1 in (14 × 25 mm)0.53 mm113 mm150Fine detail: vinyl and paper only, weed with care
1.13 × 2 in (29 × 51 mm)1.1 mm227 mm45Vinyl, card and thin sheet
1.7 × 3 in (43 × 76 mm)1.6 mm340 mm18Vinyl, card and thin sheet
2.27 × 4 in (58 × 102 mm)2.1 mm453 mm8Vinyl, card and thin sheet
3.4 × 6 in (86 × 152 mm)3.2 mm680 mm3Any material, including 3 mm wood and acrylic
4.54 × 8 in (115 × 203 mm)4.3 mm906 mm2Any material, including 3 mm wood and acrylic
6.8 × 12 in (173 × 305 mm)6.4 mm1,359 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More seahorse SVG files

← Seahorse with a heart All 12 seahorses Seahorse in seagrass →