Santa’s Cutest Elf with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Santa’s Cutest Elf” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 72 × 100 mm (2.85 × 3.94 in), scales to any size |
|---|---|
| Pieces | 10 separate pieces |
| Outlines to cut | 28: 10 outer edges and 18 cut-outs |
| Cut length | 1,744 mm at this size |
| Narrowest part | 0.7 mm at this size |
| Nodes | 597 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 1,469 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.72 × 1 in (18 × 25 mm) | 0.18 mm | 443 mm | 130 | Too fine for most machines |
| 1.45 × 2 in (37 × 51 mm) | 0.36 mm | 886 mm | 35 | Too fine for most machines |
| 2.17 × 3 in (55 × 76 mm) | 0.53 mm | 1,329 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 2.9 × 4 in (74 × 102 mm) | 0.71 mm | 1,772 mm | 6 | Fine detail: vinyl and paper only, weed with care |
| 4.34 × 6 in (110 × 152 mm) | 1.1 mm | 2,658 mm | 2 | Vinyl, card and thin sheet |
| 5.79 × 8 in (147 × 203 mm) | 1.4 mm | 3,544 mm | 2 | Vinyl, card and thin sheet |
| 8.69 × 12 in (221 × 305 mm) | 2.1 mm | 5,316 mm | 1 | Vinyl, card and thin sheet |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Santa’s Cutest Elf SVG files
-
Santa’s Cutest Elf with an elf’s face Solid · 14 pieces
-
Santa’s Cutest Elf in Pacifico Solid · 6 pieces
-
Santa’s Cutest Elf in Lobster Solid · 6 pieces
-
Santa’s Cutest Elf in Kaushan Script Solid · 16 pieces
-
Santa’s Cutest Elf in Lilita One Solid · 16 pieces
-
Santa’s Cutest Elf in Alfa Slab One Solid · 16 pieces
-
Santa’s Cutest Elf in Amatic SC Solid · 16 pieces
-
Santa’s Cutest Elf in block capitals Solid · 16 pieces
← Santa’s Cutest Elf stencil plate All 13 Santa’s Cutest Elf designs Santa’s Cutest Elf with an elf’s face →