Free sailboat SVG

Yacht sailboat heeling over SVG

Yacht sailboat heeling over, as a solid black shape
Yacht sailboat heeling over. The preview is the SVG file itself.

A racing yacht leaning into the wind, drawn out of the water so the fin keel, the bulb and the rudder show under the long hull. A big genoa overlaps the mainsail.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size88 × 100 mm (3.48 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length922 mm at this size
Narrowest part3 mm at this size
Nodes95 curve and line segments

Measured from the file. PNG: 1,777 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.88 × 1 in (22 × 25 mm)0.76 mm234 mm110Fine detail: vinyl and paper only, weed with care
1.77 × 2 in (45 × 51 mm)1.5 mm468 mm30Vinyl, card and thin sheet
2.65 × 3 in (67 × 76 mm)2.3 mm703 mm12Vinyl, card and thin sheet
3.54 × 4 in (90 × 102 mm)3 mm937 mm6Any material, including 3 mm wood and acrylic
5.3 × 6 in (135 × 152 mm)4.6 mm1,405 mm2Any material, including 3 mm wood and acrylic
7.07 × 8 in (180 × 203 mm)6.1 mm1,874 mm1Any material, including 3 mm wood and acrylic
10.61 × 12 in (269 × 305 mm)9.1 mm2,810 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More sailboat SVG files

← Sailboat monogram frame All 13 sailboats Schooner sailboat with two masts →