Sagittarius celestial card SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
An arched card 66 mm wide and 100 mm tall with the Sagittarius glyph cut out of it under a crescent moon and two stars, above a rising sun. A cut border runs round the card, held by four bridges.
What is in the file
| Size | 66 × 100 mm (2.6 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 19: 1 outer edge and 18 cut-outs |
| Cut length | 1,268 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 245 curve and line segments |
Measured from the file. PNG: 1,346 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.66 × 1 in (17 × 25 mm) | 0.53 mm | 322 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 1.32 × 2 in (34 × 51 mm) | 1.1 mm | 644 mm | 40 | Vinyl, card and thin sheet |
| 1.98 × 3 in (50 × 76 mm) | 1.6 mm | 966 mm | 15 | Vinyl, card and thin sheet |
| 2.64 × 4 in (67 × 102 mm) | 2.1 mm | 1,288 mm | 8 | Vinyl, card and thin sheet |
| 3.96 × 6 in (101 × 152 mm) | 3.2 mm | 1,932 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.28 × 8 in (134 × 203 mm) | 4.3 mm | 2,577 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.92 × 12 in (201 × 305 mm) | 6.4 mm | 3,865 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Sagittarius SVG files
-
Sagittarius queen with a crown Solid · one piece -
Sagittarius bow and arrow Solid · one piece -
Layered Sagittarius archer in three colours Layered · 3 pieces -
Sagittarius glyph Solid · one piece -
Sagittarius glyph in a ring Solid · one piece -
Sagittarius archer silhouette Solid · one piece -
Sagittarius archer line drawing Outline · one piece -
Sagittarius archer in a crescent moon Solid · one piece
← Sagittarius badge with a blank band All 13 Sagittarius designs Sagittarius queen with a crown →