Free rocket SVG

Spaceship rocket with swept wings SVG

Spaceship rocket with swept wings, as a solid black shape
Spaceship rocket with swept wings. The preview is the SVG file itself.

A sleek spaceship seen from above with its nose up: a long canopy, swept wings with a blade on each tip, two small foreplanes and an engine pod with a flame either side.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size75 × 100 mm (2.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length723 mm at this size
Narrowest part2.7 mm at this size
Nodes117 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,513 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.75 × 1 in (19 × 25 mm)0.69 mm184 mm120Fine detail: vinyl and paper only, weed with care
1.49 × 2 in (38 × 51 mm)1.4 mm367 mm35Vinyl, card and thin sheet
2.24 × 3 in (57 × 76 mm)2.1 mm551 mm15Vinyl, card and thin sheet
2.99 × 4 in (76 × 102 mm)2.7 mm735 mm6Vinyl, card and thin sheet
4.48 × 6 in (114 × 152 mm)4.1 mm1,102 mm2Any material, including 3 mm wood and acrylic
5.98 × 8 in (152 × 203 mm)5.5 mm1,469 mm1Any material, including 3 mm wood and acrylic
8.96 × 12 in (228 × 305 mm)8.2 mm2,204 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rocket SVG files

← Space shuttle rocket All 14 rockets Rocket monogram frame →