Free Reel Cool Grandpa SVG

Reel Cool Grandpa stencil plate SVG

Reel Cool Grandpa stencil plate, as a solid black shape
Reel Cool Grandpa stencil plate. The preview is the SVG file itself.

A rounded plate with “REEL COOL GRANDPA” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 57 mm (3.94 × 2.26 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut16: 1 outer edge and 15 cut-outs
Cut length1,330 mm at this size
Narrowest part1 mm at this size
Nodes352 curve and line segments

Measured from the file. PNG: 2,000 × 1,179 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.57 in (25 × 15 mm)0.25 mm338 mm150Too fine for most machines
2 × 1.15 in (51 × 29 mm)0.51 mm676 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.72 in (76 × 44 mm)0.76 mm1,013 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.29 in (102 × 58 mm)1 mm1,351 mm8Vinyl, card and thin sheet
6 × 3.44 in (152 × 87 mm)1.5 mm2,027 mm3Vinyl, card and thin sheet
8 × 4.58 in (203 × 116 mm)2 mm2,703 mm2Vinyl, card and thin sheet
12 × 6.88 in (305 × 175 mm)3 mm4,054 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Reel Cool Grandpa SVG files

← Reel Cool Grandpa outline lettering All 12 Reel Cool Grandpa designs Reel Cool Grandpa with a drop shadow →