Free Reel Cool Grandpa SVG

Reel Cool Grandpa in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Reel Cool Grandpa in Lilita One, as a solid black shape
Reel Cool Grandpa in Lilita One. The preview is the SVG file itself.

“Reel Cool Grandpa” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 52 mm (3.94 × 2.06 in), scales to any size
Pieces15 separate pieces
Outlines to cut24: 15 outer edges and 9 cut-outs
Cut length932 mm at this size
Narrowest part2.7 mm at this size
Nodes269 curve and line segments

Measured from the file. PNG: 2,000 × 1,085 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.52 in (25 × 13 mm)0.69 mm237 mm160Fine detail: vinyl and paper only, weed with care
2 × 1.05 in (51 × 27 mm)1.4 mm473 mm45Vinyl, card and thin sheet
3 × 1.57 in (76 × 40 mm)2.1 mm710 mm18Vinyl, card and thin sheet
4 × 2.1 in (102 × 53 mm)2.7 mm947 mm10Vinyl, card and thin sheet
6 × 3.14 in (152 × 80 mm)4.1 mm1,420 mm3Any material, including 3 mm wood and acrylic
8 × 4.19 in (203 × 106 mm)5.5 mm1,894 mm2Any material, including 3 mm wood and acrylic
12 × 6.29 in (305 × 160 mm)8.2 mm2,841 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Reel Cool Grandpa SVG files

← Reel Cool Grandpa in Kaushan Script All 13 Reel Cool Grandpa designs Reel Cool Grandpa in Alfa Slab One →