Free Raise Them Kind SVG

Raise Them Kind in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Raise Them Kind in Alfa Slab One, as a solid black shape
Raise Them Kind in Alfa Slab One. The preview is the SVG file itself.

“Raise Them Kind” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 32 mm (3.94 × 1.26 in), scales to any size
Pieces15 separate pieces
Outlines to cut20: 15 outer edges and 5 cut-outs
Cut length730 mm at this size
Narrowest part1.4 mm at this size
Nodes281 curve and line segments

Measured from the file. PNG: 2,000 × 692 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.32 in (25 × 8 mm)0.36 mm185 mm230Too fine for most machines
2 × 0.64 in (51 × 16 mm)0.71 mm371 mm70Fine detail: vinyl and paper only, weed with care
3 × 0.96 in (76 × 24 mm)1.1 mm556 mm30Vinyl, card and thin sheet
4 × 1.28 in (102 × 33 mm)1.4 mm742 mm16Vinyl, card and thin sheet
6 × 1.92 in (152 × 49 mm)2.1 mm1,113 mm5Vinyl, card and thin sheet
8 × 2.56 in (203 × 65 mm)2.8 mm1,483 mm4Vinyl, card and thin sheet
12 × 3.84 in (305 × 98 mm)4.3 mm2,225 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Raise Them Kind SVG files

← Raise Them Kind in Lilita One All 13 Raise Them Kind designs Raise Them Kind in Amatic SC →