Free Raise Them Kind SVG

Raise Them Kind in script and capitals SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Raise Them Kind in script and capitals, as a solid black shape
Raise Them Kind in script and capitals. The preview is the SVG file itself.

“Raise Them” in Pacifico script over “KIND” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

What is in the file

Size100 × 77 mm (3.94 × 3.05 in), scales to any size
Pieces7 separate pieces
Outlines to cut13: 7 outer edges and 6 cut-outs
Cut length1,414 mm at this size
Narrowest part1.4 mm at this size
Nodes258 curve and line segments

Measured from the file. PNG: 2,000 × 1,565 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.77 in (25 × 20 mm)0.36 mm359 mm120Too fine for most machines
2 × 1.55 in (51 × 39 mm)0.71 mm718 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.32 in (76 × 59 mm)1.1 mm1,077 mm12Vinyl, card and thin sheet
4 × 3.1 in (102 × 79 mm)1.4 mm1,437 mm6Vinyl, card and thin sheet
6 × 4.64 in (152 × 118 mm)2.1 mm2,155 mm2Vinyl, card and thin sheet
8 × 6.19 in (203 × 157 mm)2.8 mm2,873 mm1Vinyl, card and thin sheet
12 × 9.29 in (305 × 236 mm)4.3 mm4,310 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Raise Them Kind SVG files

← Raise Them Kind in block capitals All 12 Raise Them Kind designs Raise Them Kind with hearts →