Free question mark SVG

Question mark outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Question mark outline, drawn as a line — Question mark outline. The preview is the SVG file itself.

The bold mark as an outline about 3 mm wide, hook and dot both open in the middle. Two loose pieces for colouring pages, foil lines and layering over the solid mark.

What is in the file

Size	58 × 100 mm (2.28 × 3.94 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	4: 2 outer edges and 2 cut-outs
Cut length	656 mm at this size
Narrowest part	2.5 mm at this size
Nodes	62 curve and line segments

Measured from the file. PNG: 1,188 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.58 × 1 in (15 × 25 mm)	0.64 mm	167 mm	150	Fine detail: vinyl and paper only, weed with care
1.16 × 2 in (29 × 51 mm)	1.3 mm	333 mm	45	Vinyl, card and thin sheet
1.73 × 3 in (44 × 76 mm)	1.9 mm	500 mm	18	Vinyl, card and thin sheet
2.31 × 4 in (59 × 102 mm)	2.5 mm	666 mm	8	Vinyl, card and thin sheet
3.47 × 6 in (88 × 152 mm)	3.8 mm	1,000 mm	3	Any material, including 3 mm wood and acrylic
4.62 × 8 in (117 × 203 mm)	5.1 mm	1,333 mm	2	Any material, including 3 mm wood and acrylic
6.94 × 12 in (176 × 305 mm)	7.6 mm	1,999 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

What is in the file

Will it cut at your size?

More question mark SVG files