Free puzzle piece SVG

Puzzle piece outline SVG

Puzzle piece outline, drawn as a line
Puzzle piece outline. The preview is the SVG file itself.

The same piece as a line about 3.5 mm wide. For colouring, for a border round a name or a photo, or as the top layer over a solid piece in another colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length911 mm at this size
Narrowest part3.4 mm at this size
Nodes127 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.86 mm231 mm100Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)1.7 mm463 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)2.6 mm694 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)3.5 mm926 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)5.2 mm1,388 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)6.9 mm1,851 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)10 mm2,777 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More puzzle piece SVG files

← Single puzzle piece All 13 puzzle pieces Corner, edge and middle puzzle pieces →