Leopard print purse SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A domed bowling bag on two short handles, covered in leopard spots that are trimmed to leave a solid rim. Put gold, tan or a bright colour behind the holes.
What is in the file
| Size | 100 × 77 mm (3.94 × 3.05 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 37: 1 outer edge and 36 cut-outs |
| Cut length | 1,180 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 507 curve and line segments |
Measured from the file. PNG: 2,000 × 1,565 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.77 in (25 × 20 mm) | 0.25 mm | 300 mm | 120 | Too fine for most machines |
| 2 × 1.55 in (51 × 39 mm) | 0.51 mm | 599 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.32 in (76 × 59 mm) | 0.76 mm | 899 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.1 in (102 × 79 mm) | 1 mm | 1,199 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.64 in (152 × 118 mm) | 1.5 mm | 1,798 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.19 in (203 × 157 mm) | 2 mm | 2,398 mm | 1 | Vinyl, card and thin sheet |
| 12 × 9.29 in (305 × 236 mm) | 3 mm | 3,597 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.