Free poodle SVG

Peeking poodle SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Peeking poodle, as a solid black shape
Peeking poodle. The preview is the SVG file itself.

The top of a poodle face looking over a ledge: the scalloped topknot, bright eyes, the tops of the long ears and two paws hooked over the edge. For car windows, mugs and laptop lids.

What is in the file

Size100 × 63 mm (3.94 × 2.5 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length496 mm at this size
Narrowest part1 mm at this size
Nodes153 curve and line segments

Measured from the file. PNG: 2,000 × 1,296 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.63 in (25 × 16 mm)0.25 mm126 mm140Too fine for most machines
2 × 1.27 in (51 × 32 mm)0.51 mm252 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.9 in (76 × 48 mm)0.76 mm378 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.54 in (102 × 64 mm)1 mm504 mm8Vinyl, card and thin sheet
6 × 3.8 in (152 × 97 mm)1.5 mm756 mm3Vinyl, card and thin sheet
8 × 5.07 in (203 × 129 mm)2 mm1,008 mm2Vinyl, card and thin sheet
12 × 7.61 in (305 × 193 mm)3 mm1,512 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More poodle SVG files

← Poodle monogram frame All 14 poodles Layered apricot poodle in four colours →