Free police badge SVG

Police badge on a peaked cap SVG

Police badge on a peaked cap. The preview is the SVG file itself.

A peaked cap seen from the front: a wide crown, a band with a button at each end, a curved peak and a small blank badge on the front, marked off by a thin gap.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 77 mm (3.94 × 3.01 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	808 mm at this size
Narrowest part	2.2 mm at this size
Nodes	103 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,548 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.77 in (25 × 19 mm)	0.56 mm	205 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.53 in (51 × 39 mm)	1.1 mm	410 mm	35	Vinyl, card and thin sheet
3 × 2.3 in (76 × 58 mm)	1.7 mm	616 mm	12	Vinyl, card and thin sheet
4 × 3.06 in (102 × 78 mm)	2.2 mm	821 mm	6	Vinyl, card and thin sheet
6 × 4.59 in (152 × 117 mm)	3.4 mm	1,231 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.12 in (203 × 155 mm)	4.5 mm	1,642 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.18 in (305 × 233 mm)	6.7 mm	2,463 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More police badge SVG files

← Police badge in a heart All 14 police badges Police badge and handcuffs →