Free poinsettia SVG

Poinsettia on a stem SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Poinsettia on a stem, as a solid black shape
Poinsettia on a stem. The preview is the SVG file itself.

A single poinsettia on a curved stem with two toothed leaves, like a cut flower laid on the table. For the side of a card, a place name or a napkin ring tag.

What is in the file

Size65 × 100 mm (2.56 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut16: 1 outer edge and 15 cut-outs
Cut length826 mm at this size
Narrowest part2.1 mm at this size
Nodes375 curve and line segments

Measured from the file. PNG: 1,327 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.65 × 1 in (17 × 25 mm)0.53 mm210 mm140Fine detail: vinyl and paper only, weed with care
1.3 × 2 in (33 × 51 mm)1.1 mm420 mm40Vinyl, card and thin sheet
1.95 × 3 in (50 × 76 mm)1.6 mm629 mm15Vinyl, card and thin sheet
2.6 × 4 in (66 × 102 mm)2.1 mm839 mm8Vinyl, card and thin sheet
3.9 × 6 in (99 × 152 mm)3.2 mm1,259 mm2Any material, including 3 mm wood and acrylic
5.2 × 8 in (132 × 203 mm)4.3 mm1,678 mm2Any material, including 3 mm wood and acrylic
7.8 × 12 in (198 × 305 mm)6.4 mm2,518 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More poinsettia SVG files

← Poinsettia leaves and bracts All 16 poinsettias Three poinsettias with leaves →