Free play button SVG

Play button bar for a song plaque SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Play button bar for a song plaque. The preview is the SVG file itself.

A progress line with a round knob about a third of the way along, and previous, pause and next beneath it. Loose pieces with no lettering, for a clear acrylic song plaque: add your own title and photograph above.

What is in the file

Size	100 × 54 mm (3.94 × 2.11 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	5 outlines
Cut length	556 mm at this size
Narrowest part	1.8 mm at this size
Nodes	56 curve and line segments

Measured from the file. PNG: 2,000 × 1,110 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.54 in (25 × 14 mm)	0.46 mm	141 mm	160	Too fine for most machines
2 × 1.07 in (51 × 27 mm)	0.91 mm	282 mm	45	Fine detail: vinyl and paper only, weed with care
3 × 1.61 in (76 × 41 mm)	1.4 mm	424 mm	18	Vinyl, card and thin sheet
4 × 2.15 in (102 × 55 mm)	1.8 mm	565 mm	10	Vinyl, card and thin sheet
6 × 3.22 in (152 × 82 mm)	2.7 mm	847 mm	3	Vinyl, card and thin sheet
8 × 4.3 in (203 × 109 mm)	3.7 mm	1,130 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.44 in (305 × 164 mm)	5.5 mm	1,695 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More play button SVG files

← Play button with rewind, pause, stop and forward All 18 play buttons Play button on a strip of film →