Pi day pie with the sign cut in the crust SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A pie from above: a crimped edge of twenty-two scallops, a broken line where the lid meets the rim, and the pi sign cut through the middle of the crust as the steam vent. One piece, and a pun that needs no words.
What is in the file
| Size | 99 × 100 mm (3.9 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 1,147 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 246 curve and line segments |
Measured from the file. PNG: 1,983 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.99 × 1 in (25 × 25 mm) | Over 1.5 mm | 291 mm | 100 | Vinyl, card and thin sheet |
| 1.98 × 2 in (50 × 51 mm) | Over 3 mm | 583 mm | 25 | Any material, including 3 mm wood and acrylic |
| 2.97 × 3 in (76 × 76 mm) | Over 4.6 mm | 874 mm | 9 | Any material, including 3 mm wood and acrylic |
| 3.96 × 4 in (101 × 102 mm) | Over 6.1 mm | 1,165 mm | 4 | Any material, including 3 mm wood and acrylic |
| 5.95 × 6 in (151 × 152 mm) | Over 9.1 mm | 1,748 mm | 1 | Any material, including 3 mm wood and acrylic |
| 7.93 × 8 in (201 × 203 mm) | Over 12 mm | 2,331 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.89 × 12 in (302 × 305 mm) | Over 18 mm | 3,496 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More pi day SVG files
-
Pi day pie in a dish with a flag Solid · one piece -
Pi day calendar page for March 14 Solid · 4 pieces -
Cutie pi with a smiling face Solid · one piece -
Pi day heart with the sign cut out Solid · one piece -
Apple pi day apple with the sign cut out Solid · one piece -
Pi symbol outline Outline · one piece -
Layered pi day pie in three colours Layered · 3 pieces -
Pi symbol for pi day Solid · one piece
← Pi day 3.14 numerals with twelve more digits All 13 pi day designs Pi day pie in a dish with a flag →