Free phone SVG

Phone receiver on a coiled cord SVG

Phone receiver on a coiled cord, as a solid black shape
Phone receiver on a coiled cord. The preview is the SVG file itself.

A handset lying with its ear and mouth pieces down and a springy coiled cord running from one end. Three slots are cut in each end. For retro kitchen signs and call centre humour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 92 mm (3.94 × 3.61 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length705 mm at this size
Narrowest part2.6 mm at this size
Nodes172 curve and line segments

Measured from the file. PNG: 2,000 × 1,838 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.92 in (25 × 23 mm)0.66 mm179 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.83 in (51 × 47 mm)1.3 mm358 mm30Vinyl, card and thin sheet
3 × 2.75 in (76 × 70 mm)2 mm537 mm12Vinyl, card and thin sheet
4 × 3.66 in (102 × 93 mm)2.6 mm716 mm6Vinyl, card and thin sheet
6 × 5.5 in (152 × 140 mm)4 mm1,074 mm2Any material, including 3 mm wood and acrylic
8 × 7.33 in (203 × 186 mm)5.3 mm1,433 mm1Any material, including 3 mm wood and acrylic
12 × 10.99 in (305 × 279 mm)7.9 mm2,149 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More phone SVG files

← Phone call button All 17 phones Old telephone with a dial →