Free Philippines SVG

Philippines with its name beneath SVG

Philippines with its name beneath, as a solid black shape — Philippines with its name beneath. The preview is the SVG file itself.

The solid shape of the Philippines with “PHILIPPINES” in narrow capitals under it. The letters of “Philippines” are loose pieces, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	59 × 100 mm (2.31 × 3.94 in), scales to any size
Pieces	23 separate pieces
Outlines to cut	26: 23 outer edges and 3 cut-outs
Cut length	869 mm at this size
Narrowest part	1.5 mm at this size
Nodes	765 curve and line segments

Measured from the file. PNG: 1,208 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.59 × 1 in (15 × 25 mm)	0.38 mm	221 mm	150	Too fine for most machines
1.18 × 2 in (30 × 51 mm)	0.76 mm	441 mm	40	Fine detail: vinyl and paper only, weed with care
1.76 × 3 in (45 × 76 mm)	1.1 mm	662 mm	18	Vinyl, card and thin sheet
2.35 × 4 in (60 × 102 mm)	1.5 mm	883 mm	8	Vinyl, card and thin sheet
3.53 × 6 in (90 × 152 mm)	2.3 mm	1,324 mm	3	Vinyl, card and thin sheet
4.7 × 8 in (119 × 203 mm)	3 mm	1,766 mm	2	Any material, including 3 mm wood and acrylic
7.06 × 12 in (179 × 305 mm)	4.6 mm	2,649 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Philippines SVG files

← Philippines cut from a heart All 8 Philippines designs Philippines in stripes →