Free Philippines SVG

Philippines cut from a disc SVG

Philippines cut from a disc, as a solid black shape — Philippines cut from a disc. The preview is the SVG file itself.

A disc 100 mm across with the shape of the Philippines cut out of its middle. One piece: the Philippines shows in whatever is behind it, on a coaster, a hanging ornament or a round decal.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	698 mm at this size
Narrowest part	2.7 mm at this size
Nodes	440 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.69 mm	177 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)	1.4 mm	355 mm	25	Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)	2.1 mm	532 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	2.7 mm	709 mm	4	Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)	4.1 mm	1,064 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	5.5 mm	1,418 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	8.2 mm	2,128 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Philippines SVG files

← Philippines outline All 8 Philippines designs Philippines cut from a square tile →